Airborne™ Accessories are designed for connection to 802.11 wireless devices operating in the 2.4GHz ISM band. These accessories fully support the entire line of Airborne™ wireless 802.11 products. This wide assortment is intended to provide OEMs with solutions that meet the demanding and diverse requirements for any application including transportation, medical, warehouse logistics, POS, industrial, military and scientific applications. OEMs can select from these fully tested accessories or integrate their own solution.

Applications

The Airborne™ Antenna family offers antennas for embedded applications, fixed stations, mobile operation and client side devices, and for indoor and outdoor applications. The antennas feature RP-SMA, N-type and U.FL connectors that provide the designer with flexible ways to connect to Airborne wireless products.

A wide range of antenna types and gain options enable an OEM to select the antenna that best matches their application requirements. The lower gain and smaller antennas, such as the “rubber duck” antennas, fit applications where the range is not required to exceed 200-400m while the higher gain directional antennas would be suitable for extended range that require greater than 800m reach.

Specialty Antenna

To meet the demands for targeted solutions in the transportation industry, consider the ACH2-AT-DP011, a low profile, mobile, high gain omni-directional whip antenna with an integrated magnetic mount.

Customized antenna options are also available.

Download the Airborne™ Accessories Datasheet

Model# Feature	Indoor / Outdoor	Internal / External	Gain	Connector	Style	Radiation Pattern
ACH2-AT-DP002	I	E	2 dBi	RP-SMA	Whip	Omni
ACH2-AT-DP003	I	E	5 dBi	RP-SMA	Whip	Omni
ACH2-AT-DP004	I	E	5 dBi	U.FL	Whip	Omni
ACH2-AT-DP005	I/O	E	15 dBi	RP-SMA	Corner Reflector	Directional
ACH2-AT-DP006	I	E	7 dBi	RP-SMA	Ariel Patch	Directional
ACH2-AT-DP007	I/O	E	8.5 dBi	N-type	Fiberglass	Omni
ACH2-AT-DP008	I/O	E	10 dBi	RP-SMA	Patch	Directional
ACH2-AT-DP010	I/O	E	11 dBi	N-type	Fiberglass	Omni
ACH2-AT-DP011	I/O	E	5 dBi	RP-SMA	Whip - Magnetic Mount	Omni
Model #	Indoor / Outdoor	Internal / External	Connector		Cable Length
ACH0-CA-DP001	-	I	U.FL to U.FL		200mm
ACH0-CA-DP004	I/O	-	RP-SMA		100mm

 

DP002 The DP002 is a short portable dipole antenna with an RP-SMA base that attaches directly to an AirborneDirect antenna connector or to a bulkhead antenna connector on an OEM's product.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP003 The DP003 is a high gain, portable dipole antenna with an RP-SMA base that attaches directly to an AirborneDirect antenna connector or to a bulkhead antenna connector on an OEM's product. The high 5 dBi of gain increases coverage range and communication quality.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP004 The DP004 is a high-gain, portable dipole with a mechanical mounting base and a 6" (in.) flying lead terminated in U.FL compatible IPEX connector. It can attach directly to any of the Airborne™ embedded modules. The high 5 dBi of gain increases coverage range and communication quality.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP005 The DP005 is a corner reflector antenna with high 15 dBi gain. When mounted in the corner of a room or industrial facility, it provides wide area coverage. A 5' cable and mounting hardware are included. Indoor and outdoor use.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP006 The DP006 is a small, versatile patch antenna with higher gain to extend coverage range. Its unique mounting and swivel mechanism enables use as a tabletop, wall mount or ceiling mount antenna.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP007 The DP007 is a 24" (in.) tall fiberglass antenna ideally suited for outdoor mast mounting and broad omnidirectional coverage. The 8.5 dBi gain enables broad coverage range. Includes mounting hardware.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP008 The DP008 is a small but powerful patch antenna providing 10 dBi of gain. It measures 4.7" (in.) in a square sized package. Rated for indoor outdoor use. Includes mounting hardware.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

DP010 The DP010 is a 48" (in.) tall fiberglass antenna ideally suited for outdoor mast mounting and broad omnidirectional coverage. The 11 dBi gain enables broadest omnidirectional coverage range. Includes mounting hardware.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table

		DP011 The DP011 incorporates our high gain DP002 antenna (5 dBi of gain) with a magnetic mounting base and a 5' (ft.) cable for vehicle or other mounting to metal bases.   mechanical drawing and radiation distribution PDF Purchase Airborne Accessories   back to table
Download Datasheet PDF Purchase Airborne Accessories